Can anyone help me??????
-
hi who ever came in i am a ncc cadet and specialist course is coming plsss help me wif the stripping and assembling of m16s1....pls gif me a webbby where there is pictures and instructions on how to strip and assemble asap....thx!
-
-
http://www.tpub.com/content/infantryequipment/TM-9-1005-249-10/index.htm
Scroll down to the Field-Stripping M16 part
e.g. http://www.tpub.com/content/infantryequipment/TM-9-1005-249-10/css/TM-9-1005-249-10_94.htm
Hope all these helps
-
thx alot
-
More info of M16 for your info (not about stripping the rifle)
-
ok thx
-
aiyah singapore govern. very strict like hell dont want to issue M4 carbine with older style M203 40mm grenade launcher as standard weapon can use the 40mm grenade launcher to blast the enemy to hell. Take a look at the machine gun at http://www.world.guns.ru/assault/as17-e.htm
-
Good info, but please ignore the part on seperating the upper and lower receiver groups. You do not need to do that. Just open the receiver groups and remove the carrier group can liao.Originally posted by sgboy2004:http://www.tpub.com/content/infantryequipment/TM-9-1005-249-10/index.htm
Scroll down to the Field-Stripping M16 part
e.g. http://www.tpub.com/content/infantryequipment/TM-9-1005-249-10/css/TM-9-1005-249-10_94.htm
Hope all these helps -
Oh yeah, once you strip it down to the bolt cam pin, that's enough. You should have these parts with you at the end:
1. Upper & lower receiver group (still together)
2. Corking lever
3. Carrier group
4. Retaining pin
5. Firing pin
6. Bolt
7. Bolt cam pin
No need to furthur strip the bolt and the lower receiver group, unless you intend to clean them.
There's also a certain arrangement for the items stripped.
-
if i still can remember,Originally posted by Kingoftheworld:hi who ever came in i am a ncc cadet and specialist course is coming plsss help me wif the stripping and assembling of m16s1....pls gif me a webbby where there is pictures and instructions on how to strip and assemble asap....thx!
STRIPPING:
step 1:
remove magazine
step 2:
pull back charging handle and check chamber clear of rounds(VERY IMPT)
step 3:
turn fire selector to safe
step 4:
push out catch pin
step 5:
remove bolt carrier group and charging handle.
place handle on the ground.
step 6:
remove holding pin from bolt carrier. if need be, use your fingernails and dig.
once out, place on the ground.
step 7:
remove firing pin.
place on ground.
step 8:
push the bolt in, twist the bolt cam pin and pull it out.
place on ground
step 9:
remove bolt. place bolt and carrier on ground.
ASSEMBLING:
just do e reverse in order. -
thx alot all of u all
-
btw do u hav pix to illustrate the steps u told me???
-
the webby above got picture mah...Originally posted by Kingoftheworld:btw do u hav pix to illustrate the steps u told me??? -
but that rifle is different rite??
the upper reciever group totally come sout
but m16s1 onli break teh rifle and leave it in a 7-shape -
it is the same, just do not pull out the receiver pivot pin.Originally posted by Kingoftheworld:but that rifle is different rite??
the upper reciever group totally come sout
but m16s1 onli break teh rifle and leave it in a 7-shape -
oh
ok thx -
Bolt turn to four or five o'clock then push in when you assemble. Can see something like a dot or something sticking out a bit. That thing must be at your four or five o'clock. Then charging handle slide it in from bottom then go up. Don't force it in if it cannot go in. Then be careful don't like my friend put the bolt carrier group wrong way, rifle kenna jammed.
Anyway, before test got revision one. During revision pay attention can liao. Got any missing points then add on to your training aid. On second day will most probably test TF mutuals and IFC mutuals. GSK i'm not sure. Then third day is all the things you have learnt, on TF and IFC. -
Aiyo. Relax lah. This kind of thing is very simple one. Dun gan jiong when you're it can already.
Good luck anyway.