SBS 2994U on 229

SBS 346D on 229

Originally posted by Syed Luqman:SBS 2994U on 229
SBS 346D on 229
I would say that they look quite fake as the desto colour is a bit off. Look at my picture of SBS2993Y on 159 for an example. Also when you crop out the desto, crop the whole front, inclusive of the black edge. This way, when you put the desto onto the picture, there wont be such a big colour difference.
ANOTHER ANNOUNCEMENT: SCANIA N113CRB ON 105

Originally posted by Syed Luqman:SBS 2994U on 229
SBS 346D on 229
Did you asked the owner permission before editing and post the pic here? Somemore got the Copyright leh...
Originally posted by Syed Luqman:SBS 2994U on 229
SBS 346D on 229
Dont you guys have the BASIC COURTESY of at least trying to aknowledge the author of the works involved ?
Originally posted by my@jas:
How about SBS3640J on Svc 254 at Boon Lay?
hahahaha. NAC better. ![]()

SBS3583R has gotten EDS!
Originally posted by SBS2695H:
SBS3583R has gotten EDS!
i doubt this pic taken by you...
Originally posted by SBS7484P:i doubt this pic taken by you...
It's obvious.
Originally posted by SBS594D:
Spot 6 that was edited in the bus like example only. rego from TIb999B become TIb666B.
When you try to save the picture, it says TIB99Bedited.
(I dont know if that counts but still :P)
Originally posted by SBS9888Y:hahahaha. NAC better.
I can't find any Scania NAC photos taken at BNL ![]()
Originally posted by Scania N113CRB luver:The side mirrors? I thot MKII uses black side mirror similar to Habits? This one have a box bendy side mirror.
Just on a side note: I also didn't notice the side mirror until one fine day I switched on my camera and started switching between the photos of TIB997G and TIB999B. That was when I took note of the side mirrors of TIB999B, which was from those from the Box Bendies, unlike the other MkIIs.
Here are 3 unedited pics of the MkIIs, one being 997G and the two others being 999B
997G: http://willshadow.myphotoalbum.com/view_photo.php?set_albumName=album07&id=997G_c_3
999B (1, TIBS) : http://www.tib1208u.fotopic.net/p15537227.html
999B (2, NEA ad.): http://willshadow.myphotoalbum.com/view_photo.php?set_albumName=album07&id=999B_3_c
SBS9432D on 2:


There are four changes I made. Some are not obvious.
Originally posted by Raraken:
There are four changes I made. Some are not obvious.
PS. How do I make it thumbprint sized?
1. Service 850.
2. Sambawang
Originally posted by Raraken:
There are four changes I made. Some are not obvious.
How about left & right side mirrors ?
Then the orange poster at the fence which says mini fart bell ?
Originally posted by Oceane:
1. Service 850.
2. Sambawang
Sorry there should be 5. I could not see an edit I made.
1.Correct
2.Correct
Originally posted by azharjj:How about left & right side mirrors ?
Then the orange poster at the fence which says mini fart bell ?
2 more. No change to mirrors. And the poster says ball, not bell.

Spot 4 changes that I made.
To raraken: The ezlink reader seems too far in.
Originally posted by jayh272416:
Spot 4 changes that I made.
To raraken: The ezlink reader seems too far in.
1st one so obvious... the rego
Should be SBS3769Y, not SBS3769L
2nd one: is it the left mirror ?
Originally posted by azharjj:1st one so obvious... the rego
Should be SBS3769Y, not SBS3769L
2nd one: is it the left mirror ?
Correct and correct.
Two more to go.
Clue: One of them is really not obvious. Look harder.
Originally posted by jayh272416:To raraken: The ezlink reader seems too far in.
Nope. No changes to the ez-link readers.
Still 2 more people!
Originally posted by Raraken:Nope. No changes to the ez-link readers.
Still 2 more people!
The drivers body is bending the wrong way. The centrifugal force will cause him to tilt left, not right.
Originally posted by Syed Luqman:SBS 2994U on 229
SBS 346D on 229
EXCUSE ME....
I would appreciate if u had asked me before editing them.
kindly edit your post and take these photos down.
Originally posted by jayh272416:
The drivers body is bending the wrong way. The centrifugal force will cause him to tilt left, not right.
I not so pro. I'm only using Microshit Paint, not Adobe Photoshop.
STILL 2 MOAR!!
Originally posted by jayh272416:
Spot 4 changes that I made.
To raraken: The ezlink reader seems too far in.
1. The plate should be Y and not L
2. The left mirror has a blank there.
3. The svc should be 235 and not 159
4. Your Bus Stopping sign. Kana Blank out liao