Diecast Model
-
not rly a die cast model but my bus in rigs of rods screenshots :)
-
Originally posted by TIB1049L:
Front learn from SMB15T, then back learn from TIB637X when it had Power 98 Black ad some time back
TIB637X was towed today -
Originally posted by SGCar:
Interested, can send me pics?Thanks.
Cheers.
Bro its the same as tomica 95 but ad is Vernon
-
Originally posted by Acx1688:
Bro its the same as tomica 95 but ad is Vernon
OIC, ha ha. Thanks.Cheers.
-
counting down to long tomica bendy bus begins!
-
Later Don't have, like last time.
-
Originally posted by SMB66X:
Later Don't have, like last time.
Confirm have, waiting for synchronise release worldwide lah
-
Looking forward to that too...
-
1 More Week :D
-
Originally posted by Acx1688:
counting down to long tomica bendy bus begins!
1 more week exactly from today!
Cheers.
-
New stuff from 80mbus model!
http://www.80mbusmodel.com/menu-2g.html -
Originally posted by bus555:
not rly a die cast model but my bus in rigs of rods screenshots :)
Technically speaking you're at the wrong topic already.
-
Originally posted by TIB537B:
Technically speaking you're at the wrong topic already.
maybe he's telling us that this is his diecast model in his computer?Cheers.
-
Folks read this article and the last few lines...
http://www.cmn.com.hk/admin/product/upload/press/69920d5df9312070e9ba05fed8f72995.pdf
If there are enough orders, we can get Creative Masternorthcord to produce the B9 n K230UB!!! :) -
Originally posted by Acx1688:
Folks read this article and the last few lines...
http://www.cmn.com.hk/admin/product/upload/press/69920d5df9312070e9ba05fed8f72995.pdf
If there are enough orders, we can get Creative Masternorthcord to produce the B9 n K230UB!!! :)I on for both models, but need SBST approval right? I also wish to see diecast of LO3X, which is the last Leyland produce worldwide, should have it as a momento.
Cheers.
-
Originally posted by Acx1688:
Folks read this article and the last few lines...
http://www.cmn.com.hk/admin/product/upload/press/69920d5df9312070e9ba05fed8f72995.pdf
If there are enough orders, we can get Creative Masternorthcord to produce the B9 n K230UB!!! :)You would really need lots of orders and approval from companies related to the development... Say, Scania, SBST and Gemilang for a start? A lot of issues to clear. Collecting all kinds of models, I feel that bus models is one of the hardest to get through all the barriers of applying for such things...
-
Originally posted by TIB1224Y:
You would really need lots of orders and approval from companies related to the development... Say, Scania, SBST and Gemilang for a start? A lot of issues to clear. Collecting all kinds of models, I feel that bus models is one of the hardest to get through all the barriers of applying for such things...
Licenses - the hardest one. That was what happened to our beloved TIBS Habit diecast....
-
Originally posted by TIB537B:
Licenses - the hardest one. That was what happened to our beloved TIBS Habit diecast....
I would say it was lucky and unlucky that the TIBS Habit did not come out... Good point was that it would be really a nice Habit bodied vehicle, an articulated one to be precise. Bad thing is, the joints of bendy bus models are really crappy. They cannot freeze at turning position, the rubber drops off easily. Worst of all, they would tear apart after some years of collecting. What a headache...
So I have no bendies around in my collection till now, until I can devise a joint (to replace the factory made one) which is both fexlible to pose and durable to keep...
-
Originally posted by TIB1224Y:
I would say it was lucky and unlucky that the TIBS Habit did not come out... Good point was that it would be really a nice Habit bodied vehicle, an articulated one to be precise. Bad thing is, the joints of bendy bus models are really crappy. They cannot freeze at turning position, the rubber drops off easily. Worst of all, they would tear apart after some years of collecting. What a headache...
So I have no bendies around in my collection till now, until I can devise a joint (to replace the factory made one) which is both fexlible to pose and durable to keep...
If you manage to do that, I have a Semi Die-cast Articulated O405GN for you to test your prototype.
Scale 1: 32 -
sorry. jus to ask. HK$298 is equal to S$ how much?
-
Originally posted by TIB1224Y:
I would say it was lucky and unlucky that the TIBS Habit did not come out... Good point was that it would be really a nice Habit bodied vehicle, an articulated one to be precise. Bad thing is, the joints of bendy bus models are really crappy. They cannot freeze at turning position, the rubber drops off easily. Worst of all, they would tear apart after some years of collecting. What a headache...
So I have no bendies around in my collection till now, until I can devise a joint (to replace the factory made one) which is both fexlible to pose and durable to keep...
ya lor. If they made other TIBS fleet buses for collections...UDs, Scania Striders, O405, Dennis Lance. But they have to have the diecast mould made first.
haiz...i believe TIBS would be quite ok to give licenses for the diecast models, as they even have Friends of TIBS, TIBS merchandise and bright cheerful vehicles with unique bodywork. a pity they can't be in diecast form
-
Originally posted by SBS1984E:
If you manage to do that, I have a Semi Die-cast Articulated O405GN for you to test your prototype.
Scale 1: 32Erh... I got one 1/55 testbed but nah, it would not be an immediate affair.
-
Originally posted by ahjack 77:
sorry. jus to ask. HK$298 is equal to S$ how much?
$56.21
-
Originally posted by TIB1224Y:
Erh... I got one 1/55 testbed but nah, it would not be an immediate affair.
Haha... okay. Guess that O405GN needs better luck in finding a replacement Rubber articulator thingy =P
-
Originally posted by SBS1984E:
$56.21
okay thks. and another qn, i cannot get any hk buses here in sg right? jus to double confirm. cos i mayb like to order frm hk. duno is it possible. wondering abt the price of shipment. haha