pls help me with these 2 sections of the THT..
-
For the stripping n assembly..after all the assembly, we must do the the 3 checks.. can anyone kindly list down the steps to perform for the 3 checks?
-
-
1) functional check, pull the "c-ocking" handle a few times and squeeze trigger to ensure the bolt carrier group and firing pin are assembled correctly ...
2) "c-ock" put to safety catch to "safe", trigger off, the trigger should not fire off
3) put safety catch to "fire", and release under control ...
dunno my steps are correct or not
.... revision for my 7th high key and last ICT next month 
-
First before u strip ur rifle. U will say Strip Rifle... Then after stripping,stand at senang diri postiton and say Rifle Strip... When after inspecting,then u will assemble ur rifle,u will say Assemble Rifle,after assembling,
u will do the checks,they are Firing Mechanism Checked! Safety Mechanism checked ! (C-ock and switch to saftey first), then u squeezed ur trigger,squeezed the trigger again and c-ock ur rifke,dun release ur trigger,u will hear a 'thud' sound then u will say Sure Checked! u will say Rifle Assembled... Here is the steps to stripping and assembling ur rifle!!! Correct if me wrong arh!!! -
First of all which weapon are you talking about?
-
Can someone kindly tell me in detail about the steps in Firing Mechanism Check, Safety Mechanism check n sheer check?
-
u never learn all this meh in BMT?
-
I 10 months neva touch a M16 le..pls help me recall..thanks..
-
Thought Technical Handling Test only needs you to be proficient in dissassemble and assemble the weapon in the required steps?
-
pls help me..
-
Originally posted by gaoxingdcf:
Above is M16S1,but i dunno what kinda of weapon threadstarter is trained on....
First before u strip ur rifle. U will say [b]Strip Rifle... Then after stripping,stand at senang diri postiton and say Rifle Strip... When after inspecting,then u will assemble ur rifle,u will say Assemble Rifle,after assembling,
u will do the checks,they are Firing Mechanism Checked! Safety Mechanism checked ! (C-ock and switch to saftey first), then u squeezed ur trigger,squeezed the trigger again and c-ock ur rifke,dun release ur trigger,u will hear a 'thud' sound then u will say Sure Checked! u will say Rifle Assembled... Here is the steps to stripping and assembling ur rifle!!! Correct if me wrong arh!!![/b] -
double
-
u are beyond help.Originally posted by lktlkygr:pls help me.. -
You didn't tell us which weapon.
-
i'm talking about m16.. n the IA drills..i've forgotten abt it..
-
how can someone who have been through bmt forgotten abt all these basic things? pls go bang the wall...Originally posted by lktlkygr:i'm talking about m16.. n the IA drills..i've forgotten abt it..
-
Pls help me..i taking THT next tue..pls
-
exactly. it's such a pathetic excuse to use 'forgotten' as reason. shame on him, he don't deserve our help at all. since he is so sotong, may as well don't let him touch a weapon, lives are at sake here.Originally posted by monoslayer:how can someone who have been through bmt forgotten abt all these basic things? pls go bang the wall... -
worry so much for wat.. im sure they will be a RSM there to handle all ur "enquiries"....Originally posted by lktlkygr:Pls help me..i taking THT next tue..pls
-
Oh.. test ar..? chey... tot range...
-
IA Drills:
1. IA IA no feeling : Put to safe,tilt and check. Take out magazine and snap it back,c-ock again. Slap magazine,push the charging handle,observe the bolt,release,tap the forward axis.
2. IA IA Half Feeling : Half c-ock,take out magazine. C-ock and check clear
3. IA IA Empty Magazine: C-ock two times,take out magazine and check clear.
4. IA IA Double Feeling : Put to sae,take out magazine. C-ock 2 times,shake the bullet out.
Assembling of rifle:
Put the bolt back in the bolt carrier group,bolt cam,firing pin and retaining pin. Place charging handle and bolt carrier group back in the rifle. Check the safe by echoing 'Safe Mechism Checked',thn 'fire mechism check',squeeze the trigger and pull back the charging handle (Dun release the trigger),check for the 'thud' sound,echo 'sure check' Squeeze the trigger and close dust cover. -
hey moderator, pls mind what u said..u should be helping ppl n not pouring cold water n add fuel to fire..
-
Hey guys cool it down, ok someone post these...Originally posted by lktlkygr:hey moderator, pls mind what u said..u should be helping ppl n not pouring cold water n add fuel to fire..
It might be helpful to you..Originally posted by gaoxingdcf:IA Drills:
1. IA IA no feeling : Put to safe,tilt and check. Take out magazine and snap it back,c-ock again. Slap magazine,push the charging handle,observe the bolt,release,tap the forward axis.
2. IA IA Half Feeling : Half c-ock,take out magazine. C-ock and check clear
3. IA IA Empty Magazine: C-ock two times,take out magazine and check clear.
4. IA IA Double Feeling : Put to sae,take out magazine. C-ock 2 times,shake the bullet out.
Assembling of rifle:
Put the bolt back in the bolt carrier group,bolt cam,firing pin and retaining pin. Place charging handle and bolt carrier group back in the rifle. Check the safe by echoing 'Safe Mechism Checked',thn 'fire mechism check',squeeze the trigger and pull back the charging handle (Dun release the trigger),check for the 'thud' sound,echo 'sure check' Squeeze the trigger and close dust cover. -
that will depend on whether the person deserve our help or not. if everyone just want to be spoon fed with answers without first trying to solve it themselves or using 'forgotten' as excuse, then they don't deserve our help. have u asked the people around you for help?Originally posted by lktlkygr:hey moderator, pls mind what u said..u should be helping ppl n not pouring cold water n add fuel to fire..
how could one forgotten the things one have learnt in BMT. especially rifle handling? it gave the impression that u are not paying attention and using 'forgotten" always seems like the easy way out.