I play these routes:
Originally posted by The Soon:1 question:
What routes/trains do you have?
I have these routes:
- Northern Line
- Birmingham Cross-City South
I have these trains:
- LT1995 (Northern Line default)
- Cl323 (Birmingham Cross-City South default)
Please recommend me any good routes to play.
I usually play routes on the TokyoMetro.
Ginza Line(Full route and both directions) - trta01_ver2
Marunouchi Line (Only some stations completed) - Eiden02
Hibaya Line(Full route on one direction and the other direction still in development) - trta03
Hanzomon Line(Full route on one direction only) - trta08
Tozai Line(Full route on one direction only Sound data also not available) - trta5,Eidan05c and E231-800
Yurakucho Line(Only 5 stations completed on one direction) - Seibu6000 and Tobu9000
Fukotoshin Line(Only 8 stations developed and no sound data) - Can't find all the trains but only found Seibu6000 and Tobu9000.
If you have problems using at Ginza Line(trta01_ver2) and Hanzomon Line(trta08), here are your solutions.
Ginza Line(trta01_ver2):
In Neutral gear, press '8' above your keyboard to unlock the train.
In Neutral gear, press '7' above your keyboard to lock the train.
Press '0' above your keyboard at any time to switch on the lights for your dashboard.
Operate as per normal.
Hanzomon Line(trta08)
If your are using BVE4 route, you start at the first station.
In Neutral gear, press '8' above your keyboard two times. Then press 'Page Up' 4 times to enable '区間準急' Depart from the station after the music stops playing.
Please note that there will be a 60km/h speed limit after you depart from the first station. Gradually slow down as you approach the next station. There is a 15km/h speed limit as you enter the station. So you have to arrive at the station at 15 km/h. If you went over the speed limit and the ATS triggers the Emergency brake, release the ATS-P brake. For OpenBVE the default key is 'End'.
Ignore the red light indicator first. When you have perfectly stopped at the station, pull the emergency brake and move to neutral.
Then, press '7' above your keyboard to enable 'TRTA' mode and press Page Down 2 times to enable '急行' or Express mode (even though you will stop at every station). Don't worry if you hear the ATS alarm, when the system changes from ATS to ATC, the alarm will stop.
Release the Emergency brake and operate the train as per normal.
To switch between ATC and ATS press '5' or '6' above your keyboard.
To switch on dashboard lights press '0'above your keyboard.
Hong Kong MTR - Screenshots
Island Line at Tin Hau
Tseung Kwan O Line at Quarry Bay
Tung Chung Line at Hong Kong
Airport Express at Airport (Train incomplete)