detecting a more than 100Gb hdd on AX Motherboard

• syncopation_music

  30 Aug 06, 11:18

  Hey there, i trying to set to detect a 100Gb hdd on Ax Motherboard
  running on pentium 2 66Mhz
  
  but cant detect..any advise how i can do it?
  i using a master hdd of 11Gb together only
  
  
• ndmmxiaomayi

  30 Aug 06, 11:20

  Set one of the HDD to slave.
  
  You can't have 2 masters on a motherboard.
• syncopation_music

  30 Aug 06, 12:28

  Originally posted by ndmmxiaomayi:

  Set one of the HDD to slave.
  
  You can't have 2 masters on a motherboard.

  how do i do that ?
  
  i have use the jump to cable select
  
  but in BIOS wat should i do ? any advice ?
  
  
• ndmmxiaomayi

  30 Aug 06, 12:33

  Originally posted by syncopation_music:

  how do i do that ?
  
  i have use the jump to cable select
  
  but in BIOS wat should i do ? any advice ?
  
  

  Look at your HDD. There's a sticker there showing you how to add/remove/move the jumpers to slave mode.
  
  In BIOS, set this HDD to be Primary or Secondary Slave.
• meltz

  30 Aug 06, 12:36

  some useful link ... on how to install second harddisk on pc
  
  http://www.ehow.com/how_6030_install-second-hard.html
  http://www.pctechguide.com/tutorials/HardDrive1.htm