Computer problems

• 28_29_293

  1 Feb 07, 13:57

  I recently install another new hard disk (size 160GB) into my CPU. Now inside my CPU there's two hard disks. Aft i on the CPU, it cant detect the new hard disk. Wat should i do? I cant even see the welcome screen lo. Haiz sob sob.
• ndmmxiaomayi

  1 Feb 07, 14:13

  First thing first, check that the jumper settings are correct. There should only be one master and one slave.
  
  Check the stickers on the hard disk for setting the jumpers to master and slave.
  
  The one using master jumper settings should be the one where Windows is installed on.
  
  Don't use the cable select option if it is given, this will give problems.
  
  Then get into BIOS (usually by pressing the Del button when it boots up).
  
  Set the first boot device to the hard disk where Windows has been installed on.
  
  Save the settings and restart the computer.
• Herzog_Zwei

  1 Feb 07, 14:19

  Originally posted by ndmmxiaomayi:

  First thing first, check that the jumper settings are correct. There should only be one master and one slave.
  
  Check the stickers on the hard disk for setting the jumpers to master and slave.
  
  The one using master jumper settings should be the one where Windows is installed on.
  
  Don't use the cable select option if it is given, this will give problems.
  
  Then get into BIOS (usually by pressing the Del button when it boots up).
  
  Set the first boot device to the hard disk where Windows has been installed on.
  
  Save the settings and restart the computer.

  Mayi jie jie so smart!
• manyu882

  1 Feb 07, 17:25

  Originally posted by Herzog_Zwei:

  Mayi jie jie so smart!