god damn help me URGENTT HELP NEEDED
-
your printer usb port or wat? if usb then try changing to another usb portOriginally posted by AhJun:i know! but it needs the hardware wizard to continue! but the wizard dun appear anywhere... -
No need... just double click and install the driver...Originally posted by AhJun:i know! but it needs the hardware wizard to continue! but the wizard dun appear anywhere...
If you insist...
Start > Control Panel > Add/Remove Hardware... -
OK LOOK IT SAYS THIS:
PRINTER PORT DETECTION
FOR SETUP TO CONTINUE, PLS FOLLOW THESE INSTRUCTIONS
MAKE SURE THE PRINTER IS TURNED ON
CONNECT THE USB CABLE TO THE USB PORT. IF CONNECTED, DISCONNECT AND RECONNECT AGAIN
WAIT UNTIL THE FOUND NEW HARDWARE WIZARD APPEARS.CLICK INSTALL THE SOFTWARE AUTOMATICALLY AND THEN CLICK NEXT
WAIT UNTIL ITS COMPLETE...BLEAH AND SO ON
NOW THE PROBLEM IS I DISCONNECT AND RECONNECT BUT NTH HAPPEN! -
THE SETUP DID NOT DETECT THE PRINTER
-
like i said change to another USB PORT DID U LISTEN!!Originally posted by AhJun:OK LOOK IT SAYS THIS:
PRINTER PORT DETECTION
FOR SETUP TO CONTINUE, PLS FOLLOW THESE INSTRUCTIONS
MAKE SURE THE PRINTER IS TURNED ON
CONNECT THE USB CABLE TO THE USB PORT. IF CONNECTED, DISCONNECT AND RECONNECT AGAIN
WAIT UNTIL THE FOUND NEW HARDWARE WIZARD APPEARS.CLICK INSTALL THE SOFTWARE AUTOMATICALLY AND THEN CLICK NEXT
WAIT UNTIL ITS COMPLETE...BLEAH AND SO ON
NOW THE PROBLEM IS I DISCONNECT AND RECONNECT BUT NTH HAPPEN! -
i did not want to say this at all
but
your OS hates you -
WTH U THINK ALL USB ALL THE SAME ALL FIT 1 LEH I ONLI GOT THIS TYPE OF USB PORT SIZE OK!
-
all usb port are same ok and yours aren't usb port i suppose.Originally posted by AhJun:WTH U THINK ALL USB ALL THE SAME ALL FIT 1 LEH I ONLI GOT THIS TYPE OF USB PORT SIZE OK! -
Look, did you even read instructions? As I said, read that manual. Since you didn't follow, it resulted in this failure.Originally posted by AhJun:OK LOOK IT SAYS THIS:
PRINTER PORT DETECTION
FOR SETUP TO CONTINUE, PLS FOLLOW THESE INSTRUCTIONS
MAKE SURE THE PRINTER IS TURNED ON
CONNECT THE USB CABLE TO THE USB PORT. IF CONNECTED, DISCONNECT AND RECONNECT AGAIN
WAIT UNTIL THE FOUND NEW HARDWARE WIZARD APPEARS.CLICK INSTALL THE SOFTWARE AUTOMATICALLY AND THEN CLICK NEXT
WAIT UNTIL ITS COMPLETE...BLEAH AND SO ON
NOW THE PROBLEM IS I DISCONNECT AND RECONNECT BUT NTH HAPPEN!
And as I say, Start > Control Panel > Add/Remove Hardware if you insist on this wizard. Otherwise, just double click on the file you've downloaded earlier to install. The wizard is not a necessity, it's only to make instructions easier to follow.
Since this step failed, I've offered the alternative step.
You better read carefully, or your thread is going to be closed.
1. Plug in the printer, and ignore whether or not the wizard appears.
2. Turn on the printer.
3. Double click and run the file you've downloaded earlier.
4. When prompted to reboot, do so.
Method 2
1. Turn off the PC, unplug the printer.
2. Wait for 5 minutes, then re-plugged it into another USB port.
3. Turn on the PC.
4. Wait for the hardware wizard to appear.
5. Follow the instructions on the hardware wizard.
Method 3
1. Start > Control Panel > Add/Remove Hardware
2. Click Next to search for newly added hardware.
3. Let it search. Once done, look through the devices and locate your printer.
4. Click once to select it, and click Next. When prompted to locate the driver, browse to where you save the file you've downloaded earlier.
5. Click OK to install it. Reboot when prompted. -
All USB ports are the same. What are you thinking?Originally posted by AhJun:WTH U THINK ALL USB ALL THE SAME ALL FIT 1 LEH I ONLI GOT THIS TYPE OF USB PORT SIZE OK!
If what you have is a different one, you've gotten the head of the USB cable, not the tail. -
u sae the add/remove prog hor where got next to click??
-
Read properly. Add/Remove Hardware. Not Programs.Originally posted by AhJun:u sae the add/remove prog hor where got next to click?? -
ok so hardware. where got click next??
-
I think need to show you big screenshots.Originally posted by AhJun:ok so hardware. where got click next??
1. Start > Control Panel > Add/Remove Hardware
2. Click Next.
3. Let it search for the hardware.
4. Plug in your printer, select the first option. See red box. Make sure the printer is turned on as well. Then click Next.
5. Locate your printer, click once to select it. Then click Next.
6. Click on Browse and locate where you've saved the file earlier. Click OK. Once done, you should see a similar box below:
7. Reboot when prompted. -
ok look to ur first method u told me to click on the saved file and run. ok now for one more time i repeat that i can't continue BECAUSE the hardware wizard did not detect ANYTHING and i need it to carry on.
-
Why does it need the Hardware Wizard? It's a driver, it should install like any other programs.Originally posted by AhJun:ok look to ur first method u told me to click on the saved file and run. ok now for one more time i repeat that i can't continue BECAUSE the hardware wizard did not detect ANYTHING and i need it to carry on. -
is it your printer port spoilt? or the cable spoilt also
-
ok so it says there tt the port is working properly and i wasn't prompted to reboot. so what noW?
-
Reboot manually, and try to print a test page.Originally posted by AhJun:ok so it says there tt the port is working properly and i wasn't prompted to reboot. so what noW?
If it works properly, good for you. If no, then post back with a picture of your test page. -
damn la cannot print la..the driver cannot be detected at all..eh anyone know where got printing shop ah
-
haha u made me laugh.. it' 9 o clock dude.. i bet the shops are closed
-
i nv say i go todae. i juz wanna know where got printing shops
-
1. Did you install the ink cartridge?Originally posted by AhJun:damn la cannot print la..the driver cannot be detected at all..eh anyone know where got printing shop ah
2. Is it on? -
ink cart nid to install 1 meh i thot juz slot it in can liao the problem is not wif it its wif the printer it can't be detected. hmm i juz wanna ask where got printing shops
-
OK, so I presume you slot in properly?
Anyway, some shops in AMK do offer.. around Jubilee...