[openBVE] Suggestions for openBVE
-
Originally posted by FSJZ:
Is there a way to edit the trains to make it go very fast or make it brake very fast? Using TrainEditor, I suppose, but how?
You want to see my epic brake? Its damn epic. I show you the video later
-
Why not create a user manual for a noob like me?
-
Originally posted by dan474:
Why not create a user manual for a noob like me?
Manual for...?
-
Originally posted by joeyfjj:
Manual for...?
a noob like him.
Well, if dan474 does not know how to control everything, it can be found on your controls. The basics are essentially:
F6 (Open door)
F (Push Reverser Forward by a level)
V (Push Reverser Backward by a level)
Well Reverser has 3 levels, namely: F,N,B, which means Forward, Neutral and Backwards respectively
Z (Push up power notch by one level)
A (Push down power / brake notch by one level until Neutral level)
Q (Push up brake notch by one level)
For power notches, in our trains, is basically P4B3, meaning 8 notches inclusive of neutral where higher a number, the powerful the power / brake notch is for more powerful acceleration / brakes respectively.
Eg: If you are now accelerating on P3, and wishes to brake, you have to Q it but if you would like to decreases the accleration rate, than you need to A it to P2 or even P1 as keyboard button A does not brake the train if it is on Power notch mode. Similar applies to brake / deaccerlation as well
-
And also F5 to open LEFT door and F6 to open RIGHT door !
-
Originally posted by sni1996:
And also F5 to open LEFT door and F6 to open RIGHT door !
Ya, since most of the stations are on the right, I forget to state. Yes, pressed twice = close the respective doors.
-
Originally posted by C751A 70049/70050:
Ya, since most of the stations are on the right, I forget to state. Yes, pressed twice = close the respective doors.
Pai Sei Pai Sei... Just found out they are the same... POST DELETED. (As in Both Notebook and Desktop is the same..)
-
Thanks people!
-
Suddenly I Thought of a new OpenBVE as in the Changi Airport Skytrain. But i looked back and saw that the LRT Route Suggestion got Disapproved, My idea was a fail.
-
Originally posted by Bngauw:
Suddenly I Thought of a new OpenBVE as in the Changi Airport Skytrain. But i looked back and saw that the LRT Route Suggestion got Disapproved, My idea was a fail.
LOL 2 stations T1 <==> T2 | T2 <==> T3 | New: T1 >> T2 >> T3 >> BT (Vice versa)
-
Originally posted by dan474:
LOL 2 stations T1 <==> T2 | T2 <==> T3 | New: T1 >> T2 >> T3 >> BT (Vice versa)
The two staion one may be possible but too short. The LRT suggestion (As I Looked back into the History of the Thread) was disapproved because there's a Loop, where OpenBVE deosn't support. This could be made into a route if wanted. -
Originally posted by Bngauw:
The two staion one may be possible but too short. The LRT suggestion (As I Looked back into the History of the Thread) was disapproved because there's a Loop, where OpenBVE deosn't support. This could be made into a route if wanted.openBVE 2 supports loop services though. So you will have to wait for it.
-
Originally posted by SBS7322B:
openBVE 2 supports loop services though. So you will have to wait for it.
Yea.. Anybody agrees/wants a Changi Airport Skytrain Line? -
Originally posted by SBS7322B:
openBVE 2 supports loop services though. So you will have to wait for it.
I think all of you are getting confused with what openBVE 2 has to offer.
openBVE 2 still does not allow reversing of the train.
And openBVE 1 already allows "loop" (as in go one round, like SKLRT and PGLRT) services, only thing is that openBVE 1 is based on track distance and not axis.
-
Originally posted by yellowflip999:
I think all of you are getting confused with what openBVE 2 has to offer.
openBVE 2 still does not allow reversing of the train.
And openBVE 1 already allows "loop" (as in go one round, like SKLRT and PGLRT) services, only thing is that openBVE 1 is based on track distance and not axis.
But SKLRT / PGLRT sense, there is no dead end (Except Punggol North spur line / middle track in Punggol) but in openBVE1, which is now, is like WTFH because u code 1 loop, the moment the train reaches SKG after completing 1 loop, dead end is on the front.
-
Originally posted by C751A 70049/70050:
But SKLRT / PGLRT sense, there is no dead end (Except Punggol North spur line / middle track in Punggol) but in openBVE1, which is now, is like WTFH because u code 1 loop, the moment the train reaches SKG after completing 1 loop, dead end is on the front.
A very good example is the LU Northern Line to Kennington. The train actually loops one circle round back to Kennington station. However, due to openBVE 1 not supporting axis and track distance, you actually see a dead end in front but in this case it is negligible as the station is underground.
-
Shall we open a marketplace thread here?
-
Originally posted by Veyron16.4:
Shall we open a marketplace thread here?
To sell what?
-
Originally posted by joeyfjj:
To sell what?
anything.... -
can bve c151 have realistic doors or is it too lagging after it is installed?
-
Actually if you want to make a loop monorail is okay.I tried this route and it looks like it is going on a loop but actually it isn't
Download it at : http://wiki.bve-routes.com/index.php/Monorail_(Spain)
-
I think it is time for a quality control measure to be put it place.
The North South Express Fictional Route is HORRIBLE! WHO WOULD DESIGN SUCH A STUPID ROUTE THAT MAKES NO SENSE AND THE PLATFORMS COVER PART OF THE TRACKS?
-
Originally posted by Veyron16.4:
I think it is time for a quality control measure to be put it place.
The North South Express Fictional Route is HORRIBLE! WHO WOULD DESIGN SUCH A STUPID ROUTE THAT MAKES NO SENSE AND THE PLATFORMS COVER PART OF THE TRACKS?
A quality control measure would be a good idea in my opinion.In other forums they have already implemented this, and it has pretty much deterred not-up-to-standard routes from being released.
However I'm not saying that we're preventing new ambitious developers from trying out, but it is best that the newbies at least complete the route up to 75% with the skeleton fully completed and some platform objects and roofs in the route. Just post your screenshots in your own thread if the project is major enough, or maybe in the BVE Screenshots thread if it's a pretty minor project.
-
Originally posted by Boylush:
Actually if you want to make a loop monorail is okay.I tried this route and it looks like it is going on a loop but actually it isn't
Download it at : http://wiki.bve-routes.com/index.php/Monorail_(Spain)
I have this already.
-
hey i was wondering for the CGA-TNM route, why not combine it with the PSR-BGS Route so that once you reach Tanah Merah Interchange from Changi Airport, you will continue going and cross track onwards to bedok and so on or if openbve 2 can switch tracks, once reached pasir ris, you can cross track to go to expo; changi airport.