Neighbour Anyhow Park Bicycles.
-
ahhh and one more take offf the bike seat
-
No use 1, pen knife is good, but consider vandalism if caught + damaging others property.Originally posted by martin_lim85:use hammer to whack the tires -
ya lor.
-.-
too crazy cannot la. -
what type of lock they using?
if is those padlock type then use liquid paper or candle wax to jam the keyhole. since they dun want to move then might as well make them forever unable to remove. unless they cut the lock.
-
Want real crazy 1 can visit this >>> Click<<<
But to damage a bike, its real easy, V-brakes or brakes on a moutain bike the brake wire is easy to cut, but if it a U-brake, then its hard, if it's a disc or hydraulic brake, pour coke and his brake kit finished, dun ask me why,i dunno.
If you have a wire cutter, you pull the brake lever and cut the wire in there, like that he lppl must bring go bike shop repair, very ma huan 1... If you have a spanner, losen his top bolt, so that when he turn his handlebars, the front wheel won't be align and won't move with it, lastly use a penknife cut through the wheel, remember to cur the tire, inner tube and rim tape, be careful, when cut got small explosion sound. Then squeeze the spokes hard, it's bound to give way. Just DON'T get caught k.
I know of one guy threw away his $700 bike when he knew he needed to replace a new brake kit and a wheelset. -
the two bikes r locked to each other but not the grill.Originally posted by freedom4ever:what type of lock they using?
if is those padlock type then use liquid paper or candle wax to jam the keyhole. since they dun want to move then might as well make them forever unable to remove. unless they cut the lock.
so maybe its juz temporal..
dats y wait few days later den see how.
lock is those cheapo, chain type. -
ok ok..soli...i go move them away nw.
-
haha.Originally posted by rathcycle:Want real crazy 1 can visit this >>> Click<<<
But to damage a bike, its real easy, V-brakes or brakes on a moutain bike the brake wire is easy to cut, but if it a U-brake, then its hard, if it's a disc or hydraulic brake, pour coke and his brake kit finished, dun ask me why,i dunno.
If you have a wire cutter, you pull the brake lever and cut the wire in there, like that he lppl must bring go bike shop repair, very ma huan 1... If you have a spanner, losen his top bolt, so that when he turn his handlebars, the front wheel won't be align and won't move with it, lastly use a penknife cut through the wheel, remember to cur the tire, inner tube and rim tape, be careful, when cut got small explosion sound. Then squeeze the spokes hard, it's bound to give way. Just DON'T get caught k.
I know of one guy threw away his $700 bike when he knew he needed to replace a new brake kit and a wheelset.
but not my style to go dat far.
i rather throw down from 11 stories. -
If their bike is carbon fibre then they really cry ar... but aluminium wont dent little bit only.. if it is 4130 chromoly.. you need to go to a 50 storey building and throw it down before it gets a dent.Originally posted by Ito_^:haha.
but not my style to go dat far.
i rather throw down from 11 stories. -
buy your own bicycles and put it there??
-
Just put a note that says, " EH CIBAI! DON'T KANNINA AND PUT YOUR BIKES ANYHOW AH! "
-
KILLER LITTER!Originally posted by Ito_^:haha.
but not my style to go dat far.
i rather throw down from 11 stories. -
any of the mentioned small tricks would do. At most also Mischief.
Throw them down from your floor and you'll have mata knocking on ur door. -
juz kidding la.Originally posted by missqi:KILLER LITTER! bt slamming down the stairs, dat i wld do. -
use superglue
-
more hi-class work pump acid into tire try when they cycle BOOM!!!